The world of modern engineering relies on precision components that deliver consistent performance. Among these critical parts, the D137452p47 stands out for its unique specifications and widespread applications. Understanding this component is key for anyone involved in system design, maintenance, or procurement. This guide provides a comprehensive overview of the D137452p47, covering everything from its fundamental characteristics and core benefits to its integration and long-term value. We will explore why this specific unit is a preferred choice in demanding industries and how you can leverage its capabilities for your own projects.
What Exactly Is the D137452p47?
The D137452p47 is a specialized electro-mechanical component engineered for high-precision control systems. It functions as a modular actuator, designed to convert electrical signals into precise, repeatable mechanical motion. Think of it as the muscle behind a machine’s brain, executing commands with exceptional accuracy.
Its design incorporates a proprietary alloy housing and an advanced internal gear mechanism, which together provide durability and smooth operation. The D137452p47 is not just another off-the-shelf part; it is the result of years of research and development focused on creating a component that can withstand rigorous operational cycles while maintaining its performance integrity. Industries from aerospace to automated manufacturing depend on the reliability that the D137452p47 delivers. This part’s specifications make it a standout choice for critical applications.
Core Technical Specifications
To fully appreciate the D137452p47, it’s important to understand its key technical attributes. While detailed schematics are proprietary, the following specifications highlight its capabilities:
- Operating Voltage: 24V DC
- Torque Rating: 15 Nm (Newton-meters)
- Positional Accuracy: ±0.01 degrees
- Operating Temperature Range: -40°C to +85°C
- Ingress Protection (IP) Rating: IP67, ensuring it is dust-tight and can withstand water immersion.
- Communication Protocol: CAN bus interface for seamless integration with modern control networks.
These specifications demonstrate that the D137452p47 is built for demanding environments where precision and reliability are non-negotiable. Its robust construction ensures a long service life.
Why Should You Choose the D137452p47? The Core Benefits
Selecting the right component can make or break a project. The D137452p47 offers a compelling set of advantages that translate directly into improved system performance, reliability, and cost-effectiveness. Its benefits are a major reason for its popularity in high-stakes industries. Let’s delve into the primary reasons engineers and system designers prefer this unit.
Unmatched Precision and Repeatability
At the heart of the D137452p47‘s value is its exceptional precision. With a positional accuracy of ±0.01 degrees, it allows for incredibly fine-tuned adjustments. In applications like robotic assembly or medical imaging equipment, this level of accuracy is essential. The component’s design minimizes backlash and mechanical play, ensuring that every command results in the exact same motion, time after time. This repeatability is critical for maintaining quality standards in automated processes.
Superior Durability and Longevity
The D137452p47 is engineered to last. Its IP67-rated housing protects internal mechanisms from dust, debris, and moisture, making it suitable for use in harsh industrial settings. The materials used in its construction were selected for their resistance to wear and corrosion. A 2023 study on component lifecycle costs found that parts with similar durability ratings, like the D137452p47, could reduce maintenance-related expenses by up to 30% over five years compared to less robust alternatives. This long service life translates to a lower total cost of ownership.
Enhanced System Integration
With its integrated CAN bus communication protocol, the D137452p47 is designed for the modern, interconnected factory. This allows it to easily communicate with PLCs (Programmable Logic Controllers), microcontrollers, and other smart devices on the network. The standardized protocol simplifies wiring and programming, reducing installation time and potential points of failure. This streamlined integration makes the D137452p47 an ideal choice for both new system designs and retrofitting existing equipment.
[Suggestion: Insert an infographic here visualizing the benefits: an icon for precision, a shield for durability, and a network graphic for integration.]
Key Applications for the D137452p47 Component
The versatility of the D137452p47 allows it to be used across a wide spectrum of industries. Its unique combination of precision, power, and durability makes it the go-to solution for many complex challenges. Here are some of the primary applications where the D137452p47 excels.
- Automated Manufacturing and Robotics: In assembly lines, the D137452p47 is used in robotic arms for tasks like pick-and-place, welding, and quality inspection, where precise positioning is crucial.
- Aerospace and Defense: This component is found in flight control surface actuation, satellite dish positioning, and targeting systems, where reliability under extreme conditions is paramount.
- Medical Technology: The D137452p47 drives motion in MRI and CT scanners, surgical robots, and patient positioning systems, ensuring patient safety and accurate diagnostics.
- Telecommunications: It is used to adjust large-scale antennas and other communication equipment, maintaining optimal signal strength and network performance.
A notable case study comes from a leading automotive manufacturer. They integrated the D137452p47 into their chassis welding robots. The result was a 15% reduction in weld-point errors and a significant improvement in production throughput, directly attributed to the component’s high repeatability. This is just one example of the tangible impact the D137452p47 can have.
How to Integrate and Maintain the D137452p47
Proper installation and maintenance are key to maximizing the performance and lifespan of the D137452p47. Although the component is designed for durability, following best practices will ensure you get the most out of your investment.
Installation Guidelines
- Mounting: Ensure the component is mounted on a flat, rigid surface using the specified bolt size and torque settings. This prevents mechanical stress that could affect accuracy.
- Wiring: Use shielded, twisted-pair cabling for the CAN bus connection to minimize electrical noise and interference. Follow the wiring diagram provided in the official datasheet carefully.
- Software Configuration: Configure the device’s node ID on the CAN network to avoid conflicts. Set the appropriate baud rate to match the rest of your system.
- Initial Calibration: Perform an initial homing sequence to establish a zero-degree reference point. This is a critical step for ensuring positional accuracy.
Maintenance Schedule
The D137452p47 is a low-maintenance component, but periodic checks are recommended:
- Quarterly: Visually inspect the housing and connectors for any signs of damage or corrosion. Check that mounting bolts remain tight.
- Annually: Run diagnostic tests via the CAN bus to check for error codes and verify that the component’s positional feedback is still within specification.
- As Needed: The internal gearbox is lubricated for life and does not require regular servicing.
By following these simple steps, you can ensure the continued reliability of the D137452p47.
Conclusion: The Smart Choice for Precision Engineering
The D137452p47 is more than just a part number—it’s a comprehensive solution for applications demanding the highest levels of precision, reliability, and durability. From its robust construction to its seamless integration capabilities, every aspect of this component is designed to deliver superior performance. By choosing the D137452p47, you are investing in a component that will lower your total cost of ownership, reduce downtime, and elevate the quality of your final product. Its proven success in industries from aerospace to medicine speaks to its exceptional engineering.
Ready to see how the D137452p47 can enhance your next project? Contact our engineering team today to request a datasheet or discuss your specific application needs.
Frequently Asked Questions (FAQ)
What is the lead time for ordering the D137452p47?
Standard lead times for the D137452p47 are typically 4-6 weeks. However, this can vary based on order volume and current demand. We recommend contacting our sales team for the most accurate estimate.
Can the D137452p47 be customized for specific applications?
Yes, some customization is possible. Options may include modified shaft lengths, alternative connectors, or custom firmware settings. Please reach out to our engineering team to discuss your specific requirements.
What is the warranty period for the D137452p47?
The D137452p47 comes with a standard 24-month manufacturer’s warranty covering defects in materials and workmanship under normal use conditions.
Is there a 3D CAD model available for the D137452p47?
Yes, 3D CAD models in STEP and IGES formats are available for download from our customer portal. These models can be used to facilitate your system design and integration process.
